If you’re into Minecraft, you know how addictive it can get. The beauty of Minecraft stems from the fact that you can use your imagination to create anything you want. It gives you the chance to navigate your way around it, making your gaming experience worthwhile. The most straightforward rule of thumb is to avoid speed hacks to avoid wasting your time. According to Friction Horizon, this concept also applies to building a water elevator. But how do you go about it? Here is a seven-step guide and what you need to make your building experience successful.
When building your water elevator, consider the following factors:
- Ensure your shaft can go up and down using building blocks, depending on what you prefer
- Create an open space in the middle of those building blocks
- Mount the water blocks in the empty spaces between the building blocks until the structure reaches your preferred height
- Place the foundation blocks on soul sand
What you’ll need:
According to Sports Keeda, here is what you’ll need:
- Building blocks (go for glass blocks because they are transparent and esthetically appealing)
- A wooden spruce door for esthetic value (optional)
- Water bucket to provide water for filling up the elevator
- Kelp- transforms water blocks into water sources
- Oak signs to prevent water flow on either side of the entrance
- Magma block for creating a downward flow of water
- Soul sand block- to propel the water upwards when they are at the base of the water elevator
Step-by-step guide for building a water elevator in Minecraft
Have you gathered all the items for building a water elevator? Great! Let’s get started.
Step 1: Look for a suitable location
If you’re a pro in Watercraft, you likely know the function of elevators. They work like brick-and-mortar elevators, and they help you access the upper floors of the building you intend to create. The easiest hack to this is finding the right spot. Make sure your elevator is in a place where you can reach wherever you want to go.
Step 2: Create the exteriors of the elevators using building blocks
Once you’ve identified the right spot for your building block, it’s time to customize the outer structure of the elevator. Use building blocks of your preference to accomplish this. Start by arranging the bottom-most blocks, ensuring the three blocks lie side-by-side with an open space at the center. Stack up the building blocks to a height of your choice. The higher, the better but don’t go overboard.
Step 3: Install the door in the elevator
Suppose you’ve already stacked up a set of three blocks. In that case, you can scroll back to the bottom-most part of your elevator. Do you remember that open side of the three-block structure you created at the bottom of the elevator? That’s the right spot to install the wooden door. You’ll know you did an excellent job if the door fits correctly in the open space to make your elevator have four sides. Remember to have the door closed.
Step 4: Pour water into the elevator
Assuming there’s no space left after installing the closed wooden door, it’s time to go to the top area of the structure that the elevator will sit on. Using the water bucket, pour water starting from the bottom or base of the elevator. The amount of water you’ll need depends on the height of the building. Before pouring down any water, place two wooden signs on the sides of the entrance. The signs are more like full blocks that prevent water from flowing through the doorway and all over the place. Avoid placing them inside the shaft. Now, you can go to the top of the elevator, where you intend to leave from. Place your water source at the top of the shaft against the last block. According to The Gamer, the water will observe the rule of gravity by flowing downwards. Go back to the bottom of the shaft to confirm if everything has fallen in place. You will know you did everything right if the signs prevent water from flowing outside the shaft.
Step 5: Use Kelp to change to water source blocks
Upon filling the whole center space, it’s time to put the kelp to use. Kelp helps you turn water blocks into source blocks. Now you can return to the bottom of the elevator to dismantle the bottom kelp since it’s outlived its usefulness. This will leave a shaft full of water source blocks.
Step 6: Build an upward elevator
If you prefer the upward elevator option, the first you should do is go to the base of the elevator structure. Next, break the kelp before creating the center of the elevator using a soul sand block. The action makes you go up from the base upon walking through the elevator entrance.
Step 7: Build a downward elevator
Building a downward elevator works using a Magma block, not the soul sandbox. The elevator will take you downwards upon entering from the top.
- Magma works by pulling everything down as long as they fall under the water source above them. They are the best tools to build a downward elevator.
- A soul sandbox works the opposite way. They propel anything in the water upwards, making them perfect for building upward elevators.
- Kelp is a perfect tool for turning water into source blocks from water blocks. Please get rid of them once that happens.
- Signs are more of overflowing blockers. They prevent water from flowing out of the elevator, helping you walk on water from the entrance.
- You’ll know you did the job right if the elevators resemble rudimentary flower shapes with a petal in between them.
Building a water elevator in Minecraft may seem daunting, but it only takes a keen eye for detail and is passionate about it. Your water elevator will look marvelous once you gather all the tools and materials and follow these steps. Don’t beat yourself up if you get stuck because there are second chances for everything.